Home / Mine Hoists for Sale, Used Mine Hoists, Winches for Sale for Mining
  • 1

Single Drum Mine Hoist Winch Id# H065

15'' Across Drum, 5'' Flange deep, Lake Shore Cargo Winch, Static Test Load 14,800 lb, Dynamic Test Load 11,000 lbs, Working Load 7,400 lbs.

Single Drum Mine Hoist Winch Id# H120

26'' Across Drum Joy Mine Hoist

Single Drum Mine Hoist WinchId# H070

4ft dia Hoist x 30'' across drum, 6'' Flange deep, Clyde Iron Works Hoist.

Koepe Mine Hoist Winch Id# H060

4.33 ft Hoist, Nordberg 52'' drum dia Hoist, 75hp DC Motor 850rpm, Type: Koepe, Three rope 5/8'' dia, Brakes: twin caliper brakes acting on drum, one on either side of rope casset, brakes with weights and air operated cylinders, Gear box: Mfg Faulk, Ratio 17.43/1, Model 2100/2-A Direct coupled to drum shaft, Speed: 666 FPM, Drum Fabricated 52'' dia 9.5'' across rope cassette, Rim Pull at 75hp: 3700 lbs Live load in counter 5000 lbs could be converted to single drum but would be limited to 500' at three layers of rope, Bearings: Spherical Roller Bearings, Controls: Drum Elevator type controller and lilly Model D, Hoist has never been installed, Bearings and components were in a warehouse and are in excellent condition, Has the MG set but is missing the electrical panel for controlling field current and loop breaker relay.

Single Drum Mine Hoist Winch Id# H015

5ft Hoist, Coeur D' Alene Hoist, 5ft, drum width 48'', 200hp AC Motor, 575 rpm, 440v, two parallel post drum caliper type located on either side of drum with counterweights, speed: 379 FPM, smooth face, 1 1/4 rope, 3 stage gear, only one hoist has the counterweight. TWO AVAILABLE

Single Drum Mine Hoist Winch Id# H140

6 FT Single Drum Mine Hoist, driven by a wheel motor off a 150 Ton electric haul pack, wheel motor is 500 HP Continous DC with built in planetaries. TWO AVAILABLE

Double Drum Mine Hoist Winch Id# H085

6ft Hoist Canadian Ingersoll Rand, 72'' dia x 60'' Double Drum Hoist, Service type: sinking and production, Estimated depth 1530ft (1 1/8'' Cable) or 1950ft ( 1'' cable), Inertia (hoist + sheave): 400,000 lb-ft2, Type of Controller: Lilly Duplex Model C 4476 4477, Maximun Load Permitted 16,000lbs, Rotation Speed 54.65 rpm, Pitch 1.21'', Motors: GE, 300hp, 2200v, 490rpm, Inertia per Motor*g: 1 300(lb ft2), Number of gear tooth (main gear) 332, Number of pinion tooth 30, Gearing Ratio 11.07

Single Drum Mine Hoist Winch Id# H030

6ft Hoist x 48'' across face, single drum hoist, skid mounted, parallel post brake, pneumatic operated pinion brake, 200hp Induction GE Motor, 580 rpm, 440v, 258amps.

Single Drum Mine Hoist Winch Id# H025

6.66 ft Hoist, Pikrose Hoist, 80'' drum dia, 60'' face, currently has a continuos haulage sheave bolted to the face of the drum, can be easily removed, looks to be a split drum, skid mounted and skid is extended to include the gear box and auxiliaries, Brakes: drum caliper type hydraulic release, spring applied, one set of calipers on either side of drum, Speed: 948 FPM.

Single Drum Mine Hoist Winch Id# H055

8ft Hoist, Ottumwa 8ft Single Drum Hoist, Line Pull at 24,000, 1,000hp Motor, Rope Size 1.38'', Designed Depth 7,500, # of Drums 1, Drum Face Width 83'', Drum Dia 96'', Date 1-1-1972, Speed 1,300 Ft / Min, Bearings: Babbit, Drum Brakes: Parallel Post Brakes Two Pinions Hydraulic Low P, Drum Description: Lebus Grooved Shelled, Power Type AC, Voltage AC 2300, Motors: 2-500hp AC 2300v Wound Rotor 750v Rotor 514 rpm, MG Sets: none, Electrical Controls: AC Wound Rotor W DC Dynamic Braking, Clutches: none, Pinion Gear 23 tooth, Bull Gear Herringbone 250 @ 18'', This Hoist is in excellent condition, is still installed in a good climate, well maintained, pinions good for 2500 Ft Lbs.

Single Drum Mine Hoist Winch Id# H035

9ft Hoist x 5ft Canadian Ingersoll Rand Over and Under Wind Hoist, Type: two drums on a shaft one against another (single drum) one drum for the counter weight and the other for the skip or cage.

Single Drum Mine Hoist Winch Id# H095

10ft Hoist, Nordberg Single Drum Hoist, 500hp Motor, 120'' diameter, 50'' Face, 6 1/2'' Flange Depth, Rope Cassete Grooving Spiral Groove, Brake system: Caliper Drum Type Pararell Brakes,Medium Pressure Hydraulics Composite wearpads, counterweight to set, hydraulics torelease, Deum Speed 23.38 RPM, Cable 1 3/8 Brand new Spare Rope with certs, Speed with existing motor 734 ft/min or 1,000ft/min with 800hp Dc motor and new drive, Rim Pull: 22,500lbs, Date 1970, depth of use at Prev Project: 1,800ft

Double Drum Mine Hoist Winch Id# H010

10ft Hoist, GHH Hoist, 10' Diameter, Double Drum, 1200 hp Motor, with all electrical controls, drives, sheaves, spare ropes, house building and Headframe.

Single Drum Mine Hoist Winch Id# H110

12ft Hoist, ASEA Single Drum Hoist, 12ft x 6.5ft Mine Hoist, Type HTDE-144 INCH, Serial # 329, ASEA 2,100 / 4,080 kW, 1000 VDC Drive Hoist Motor, 65,000lbs Line Pull, variable speed up to 2,000 fpm, Direct Drive, 3,000 Foot Depth, 1.75'' rope diameter, 66,000 lbs maximum static rope stress, Disk Brakes with four brake stands one disc on each side of drum Hagglund 408 calipers 3 per stand, Includes all related electrical and mechanical equipment, includes a ASEA Motor LH 2207, No 64991438, DC Motor 2,100 Cont., 4,080 kW momentary, 53 rpm rated, 47 rpm momentary, YOM 1974, includes GE Transformer, Dry type, No 281710, En. 57399, 750 KVA 80C.AN, 3 phase, 60 cycles, 4160-600Y/346 volts, Low Voltage 600Y 346 volts, 722 amps, 5.6 % @ 75oC Impedance.

Double Drum Mine Hoist WinchId# H135

12ft Double Drum Mine Hoist

Double Drum Mine Hoist WinchId# H125

15ft Hoist, Double Drum GHH Mine Hoist, 110,000lbs line pull, 2,000 ft per min, 5,000ft depth, Single Clutch Double Drum, 5,000hp

  • 1